20191029, 13:44  #45 
"Ed Hall"
Dec 2009
Adirondack Mtns
4,007 Posts 
I'm always using quotes around the basic operation, so I haven't noticed this trouble. Any options have to be outside the quotes, so maybe the quotes are a way to make sure they are parsed correctly. An example is how I get an SNFS polynomial:
Code:
./yafu "snfs(<Homogenous Cunningham number>,<cofactor to work on>)" v np 
20191029, 14:02  #46  
"Ben"
Feb 2007
2·1,789 Posts 
Quote:


20191029, 14:09  #47 
"Ben"
Feb 2007
2·1,789 Posts 
your snfs example is exactly right.
Last fiddled with by bsquared on 20191029 at 14:10 
20200322, 21:15  #48 
Aug 2006
Monza, Italy
73 Posts 
Hi all, I am trying to install yafu (trunk) on an Ubuntu subsystem but when I run
Code:
./yafu "tune" Code:
make clean make x86_64 NFS=1 Code:
make clean make x86_64 Code:
starting SIQS on c65: 34053408309992030649212497354061832056920539397279047809781589871 ==== sieving in progress (12 threads): 6448 relations needed ==== ==== Press ctrlc to abort and save state ==== Segmentation fault (core dumped) 
20200323, 02:51  #49 
"Ed Hall"
Dec 2009
Adirondack Mtns
4,007 Posts 
This is something B^{2} will have to answer, although you might try a little bit earlier revision and see if it works, until B^{2} can give some help.
If he doesn't happen to catch the issue in this thread, you might try posting a note in the YAFU Bugs thread 
20200323, 13:45  #50 
"Ben"
Feb 2007
2·1,789 Posts 
Hmm, I am not having any problems with this one.
Can you rerun with v v on the command line? Also can you post your gcc version (gcc v)? 
20200323, 14:10  #51 
Aug 2006
Monza, Italy
111_{8} Posts 
Thank you both for the quick replies.
I have recompiled it with Code:
make clean make x86_64 NFS=1 Here's the report of the v v run on the same C80 failing the "tune": Code:
redgolpe@c2018:~/yafu$ ./yafu v v 03/23/20 15:06:31 v1.34.5 @ c2018, System/Build Info: Using GMPECM 7.0.5dev, Powered by GMP 6.2.0 detected Intel(R) Core(TM) i77800X CPU @ 3.50GHz detected L1 = 32768 bytes, L2 = 8650752 bytes, CL = 64 bytes measured cpu frequency ~= 3503.983800 using 1 random witnesses for RabinMiller PRP checks =============================================================== ======= Welcome to YAFU (Yet Another Factoring Utility) ======= ======= bbuhrow@gmail.com ======= ======= Type help at any time, or quit to quit ======= =============================================================== cached 78498 primes. pmax = 999983 >> factor(33727095233132290409342213138708322681737322487170896778164145844669592994743377) fac: factoring 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fac: using pretesting plan: normal fac: no tune info: using qs/gnfs crossover of 95 digits input from file = 33727095233132290409342213138708322681737322487170896778164145844669592994743377 input to yafu = 33727095233132290409342213138708322681737322487170896778164145844669592994743377 input matches with multiple of 1 fac: found siqs savefile, resuming siqs input from file = 33727095233132290409342213138708322681737322487170896778164145844669592994743377 input to yafu = 33727095233132290409342213138708322681737322487170896778164145844669592994743377 input matches with multiple of 1 starting SIQS on c80: 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fb bounds100% small: 1024 SPV: 35 10bit: 96 11bit: 168 12bit: 304 13bit: 536 32k div 3: 688 14bit: 960 15bit: 1752 med: 2512 large: 14096 all: 47184 start primes SPV: 241 10bit: 1033 11bit: 2089 12bit: 4261 13bit: 8317 32k div 3: 10987 14bit: 16451 15bit: 32789 med: 49307 large: 327571 restarting siqs from saved data set 0 relations found: 0 full + 0 from 0 partial threw away 0 relations with large primes too small ==== sieve params ==== n = 80 digits, 265 bits factor base: 47184 primes (max prime = 1218601) single large prime cutoff: 109674090 (90 * pmax) double large prime range from 41 to 49 bits double large prime range from 1484988397201 to 296611012458251 allocating 7 large prime slices of factor base buckets hold 2048 elements using SSE2 enabled 32k sieve core sieve interval: 10 blocks of size 32768 polynomial A has ~ 10 factors using multiplier of 1 using SPV correction of 21 bits, starting at offset 35 trial factoring cutoff at 87 bits ==== sieving in progress (12 threads): 47248 relations needed ==== ==== Press ctrlc to abort and save state ==== Segmentation fault (core dumped) Code:
Using builtin specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64linuxgnu/7/ltowrapper OFFLOAD_TARGET_NAMES=nvptxnone OFFLOAD_TARGET_DEFAULT=1 Target: x86_64linuxgnu Configured with: ../src/configure v withpkgversion='Ubuntu 7.5.03ubuntu1~18.04' withbugurl=file:///usr/share/doc/gcc7/README.Bugs enablelanguages=c,ada,c++,go,brig,d,fortran,objc,objc++ prefix=/usr withgccmajorversiononly programsuffix=7 programprefix=x86_64linuxgnu enableshared enablelinkerbuildid libexecdir=/usr/lib withoutincludedgettext enablethreads=posix libdir=/usr/lib enablenls enablebootstrap enableclocale=gnu enablelibstdcxxdebug enablelibstdcxxtime=yes withdefaultlibstdcxxabi=new enablegnuuniqueobject disablevtableverify enablelibmpx enableplugin enabledefaultpie withsystemzlib withtargetsystemzlib enableobjcgc=auto enablemultiarch disablewerror witharch32=i686 withabi=m64 withmultiliblist=m32,m64,mx32 enablemultilib withtune=generic enableoffloadtargets=nvptxnone withoutcudadriver enablechecking=release build=x86_64linuxgnu host=x86_64linuxgnu target=x86_64linuxgnu Thread model: posix gcc version 7.5.0 (Ubuntu 7.5.03ubuntu1~18.04) Last fiddled with by RedGolpe on 20200323 at 14:12 Reason: clarifications 
20200323, 14:57  #52 
"Ed Hall"
Dec 2009
Adirondack Mtns
4007_{10} Posts 
I noticed that you had a siqs savefile that was grabbed by the current run. Not sure if it could cause troubles, but try removing all files from earlier runs (factor.log, session.log, siqs.dat). Also try running it without yafu.ini. Maybe, make a temp directory and copy only the yafu file into it and try it there.
I tried a fresh, current install on an 18.04 machine, copied yafu into a clean directory, and it ran fine: Code:
$ ./yafu "factor(33727095233132290409342213138708322681737322487170896778164145844669592994743377)" . . . SIQS elapsed time = 113.6559 seconds. Total factoring time = 135.7024 seconds ***factors found*** P40 = 3104758941649954796179093599696620654807 P41 = 10863031838216972467057273004441996191511 1 
20200323, 15:13  #53 
Aug 2006
Monza, Italy
73_{10} Posts 
That was just the leftover from the previous tune, which still failed. I gave it a shot anyway, but no luck:
Code:
redgolpe@c2018:~$ mkdir yafutmp redgolpe@c2018:~$ cd yafutmp redgolpe@c2018:~/yafutmp$ cp ../yafu/yafu . redgolpe@c2018:~/yafutmp$ ls yafu redgolpe@c2018:~/yafutmp$ ./yafu v v 03/23/20 16:10:13 v1.34.5 @ c2018, System/Build Info: Using GMPECM 7.0.5dev, Powered by GMP 6.2.0 detected Intel(R) Core(TM) i77800X CPU @ 3.50GHz detected L1 = 32768 bytes, L2 = 8650752 bytes, CL = 64 bytes measured cpu frequency ~= 3503.987970 using 1 random witnesses for RabinMiller PRP checks =============================================================== ======= Welcome to YAFU (Yet Another Factoring Utility) ======= ======= bbuhrow@gmail.com ======= ======= Type help at any time, or quit to quit ======= =============================================================== cached 78498 primes. pmax = 999983 >> factor(33727095233132290409342213138708322681737322487170896778164145844669592994743377) fac: factoring 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fac: using pretesting plan: normal fac: no tune info: using qs/gnfs crossover of 95 digits div: primes less than 10000 rho: x^2 + 3, starting 1000 iterations on C80 rho: x^2 + 2, starting 1000 iterations on C80 rho: x^2 + 1, starting 1000 iterations on C80 pm1: starting B1 = 150K, B2 = gmpecm default on C80 fac: setting target pretesting digits to 24.62 fac: estimated sum of completed work is t0.00 fac: work done at B1=2000: 0 curves, max work = 30 curves fac: 30 more curves at B1=2000 needed to get to t24.62 ecm: 30/30 curves on C80, B1=2K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 1.00 fac: t20: 0.04 fac: estimated sum of completed work is t15.18 fac: work done at B1=11000: 0 curves, max work = 74 curves fac: 74 more curves at B1=11000 needed to get to t24.62 ecm: 74/74 curves on C80, B1=11K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 7.17 fac: t20: 1.04 fac: t25: 0.05 fac: estimated sum of completed work is t20.24 fac: work done at B1=50000: 0 curves, max work = 214 curves fac: 188 more curves at B1=50000 needed to get to t24.62 ecm: 188/188 curves on C80, B1=50K, B2=gmpecm default, ETA: 0 sec fac: setting target pretesting digits to 24.62 fac: t15: 34.02 fac: t20: 9.99 fac: t25: 0.93 fac: t30: 0.06 fac: estimated sum of completed work is t24.64 starting SIQS on c80: 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fb bounds: 85% small: 1024 SPV: 35 10bit: 96 11bit: 168 12bit: 304 13bit: 536 32k div 3: 688 14bit: 960 15bit: 1752 med: 2512 large: 14096 all: 47184 start primes SPV: 241 10bit: 1033 11bit: 2089 12bit: 4261 13bit: 8317 32k div 3: 10987 14bit: 16451 15bit: 32789 med: 49307 large: 327571 ==== sieve params ==== n = 80 digits, 265 bits factor base: 47184 primes (max prime = 1218601) single large prime cutoff: 109674090 (90 * pmax) double large prime range from 41 to 49 bits double large prime range from 1484988397201 to 296611012458251 allocating 7 large prime slices of factor base buckets hold 2048 elements using SSE2 enabled 32k sieve core sieve interval: 10 blocks of size 32768 polynomial A has ~ 10 factors using multiplier of 1 using SPV correction of 21 bits, starting at offset 35 trial factoring cutoff at 87 bits ==== sieving in progress (1 thread): 47248 relations needed ==== ==== Press ctrlc to abort and save state ==== Segmentation fault (core dumped) redgolpe@c2018:~/yafutmp$ 
20200323, 15:58  #54 
"Ben"
Feb 2007
110111111010_{2} Posts 
I don't know why it is failing this way, but I'm using a different version of gcc and much older versions of ECM and GMP.
It may be more productive to move forward in yafu releases rather than backward because the morerecent stuff is more likely to work with morerecent versions of dependent libraries. So, if you wouldn't mind, get a snapshot of the code at https://sourceforge.net/p/yafu/code/.../branches/wip/ and rebuild. While you are at it, since you have a skylakex, build using x86_64 NFS=1 SKYLAKEX=1 USE_BMI2=1 USE_AVX2=1, as that will run 2x faster than just with SSE2. Last fiddled with by bsquared on 20200323 at 15:59 
20200323, 17:00  #55 
"Ed Hall"
Dec 2009
Adirondack Mtns
FA7_{16} Posts 
I updated gmp, ecm and msieve and now I'm crashing, too.
Code:
$ ./yafu v v 03/23/20 12:58:41 v1.34.5 @ math20, System/Build Info: Using GMPECM 7.0.5dev, Powered by GMP 6.2.0 detected Intel(R) Core(TM) i54570S CPU @ 2.90GHz detected L1 = 32768 bytes, L2 = 6291456 bytes, CL = 64 bytes measured cpu frequency ~= 2893.267390 using 1 random witnesses for RabinMiller PRP checks =============================================================== ======= Welcome to YAFU (Yet Another Factoring Utility) ======= ======= bbuhrow@gmail.com ======= ======= Type help at any time, or quit to quit ======= =============================================================== cached 78498 primes. pmax = 999983 >> factor(33727095233132290409342213138708322681737322487170896778164145844669592994743377) fac: factoring 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fac: using pretesting plan: normal fac: no tune info: using qs/gnfs crossover of 95 digits div: primes less than 10000 rho: x^2 + 3, starting 1000 iterations on C80 rho: x^2 + 2, starting 1000 iterations on C80 rho: x^2 + 1, starting 1000 iterations on C80 pm1: starting B1 = 150K, B2 = gmpecm default on C80 fac: setting target pretesting digits to 24.62 fac: estimated sum of completed work is t0.00 fac: work done at B1=2000: 0 curves, max work = 30 curves fac: 30 more curves at B1=2000 needed to get to t24.62 ecm: 30/30 curves on C80, B1=2K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 1.00 fac: t20: 0.04 fac: estimated sum of completed work is t15.18 fac: work done at B1=11000: 0 curves, max work = 74 curves fac: 74 more curves at B1=11000 needed to get to t24.62 ecm: 74/74 curves on C80, B1=11K, B2=gmpecm default fac: setting target pretesting digits to 24.62 fac: t15: 7.17 fac: t20: 1.04 fac: t25: 0.05 fac: estimated sum of completed work is t20.24 fac: work done at B1=50000: 0 curves, max work = 214 curves fac: 188 more curves at B1=50000 needed to get to t24.62 ecm: 188/188 curves on C80, B1=50K, B2=gmpecm default, ETA: 0 sec fac: setting target pretesting digits to 24.62 fac: t15: 34.02 fac: t20: 9.99 fac: t25: 0.93 fac: t30: 0.06 fac: estimated sum of completed work is t24.64 starting SIQS on c80: 33727095233132290409342213138708322681737322487170896778164145844669592994743377 fb bounds: 85% small: 1024 SPV: 35 10bit: 96 11bit: 168 12bit: 304 13bit: 536 32k div 3: 688 14bit: 960 15bit: 1752 med: 2512 large: 14096 all: 47184 start primes SPV: 241 10bit: 1033 11bit: 2089 12bit: 4261 13bit: 8317 32k div 3: 10987 14bit: 16451 15bit: 32789 med: 49307 large: 327571 ==== sieve params ==== n = 80 digits, 265 bits factor base: 47184 primes (max prime = 1218601) single large prime cutoff: 109674090 (90 * pmax) double large prime range from 41 to 49 bits double large prime range from 1484988397201 to 296611012458251 allocating 7 large prime slices of factor base buckets hold 2048 elements using SSE2 enabled 32k sieve core sieve interval: 10 blocks of size 32768 polynomial A has ~ 10 factors using multiplier of 1 using SPV correction of 21 bits, starting at offset 35 trial factoring cutoff at 87 bits ==== sieving in progress (1 thread): 47248 relations needed ==== ==== Press ctrlc to abort and save state ==== Segmentation fault (core dumped) 
Thread Tools  
Similar Threads  
Thread  Thread Starter  Forum  Replies  Last Post 
How I Install CADONFS onto my Ubuntu Machines  EdH  EdH  3  20190624 03:42 
How I Install GMPECM onto my Ubuntu Machines  EdH  EdH  12  20190416 09:28 
How I Install msieve onto my Ubuntu Machines  EdH  EdH  0  20180223 14:43 
How I Install ggnfs onto my Ubuntu Machines  EdH  EdH  0  20180222 03:31 
How I Install GMP onto my Ubuntu Machines  EdH  EdH  0  20180221 23:48 